xLobby Multi-Client & Server Support

Dual and multiple displays

xLobby Multi-Client & Server Support

Postby wesblack on Wed Feb 20, 2008 6:11 am

This area will be used for xLobbys Multi-Zone Video supported products and detailed information about how xLobby servers and client machines are configured and setup and the hardware required to deliver video to multiple locations.


Image

Wes Black \ Calrad
wesblack
 
Posts: 1134
Joined: Mon Mar 05, 2007 5:02 pm
Location: Valencia, Ca

Re: xLobby Multi-Client & Server Support

Postby wesblack on Sun Mar 02, 2008 4:31 am

xLobby can be configured in several differnt ways to distribute video to single or multiple displays.

1. A single or multiple xLobby client units video outputs can be connected to either a component or HDMI matrix switcher, allowing the content to be selectable to any display that is connected. Multiple xLobby clients can be selected if installed and connected to the matrix switcher source inputs, this type of configuration allows multiple users to watch any of the connected xLobby clients content from different rooms.

2. The xLobby video output can be connected to either a component or HDMI distribution amplifier, provideing the ability to feed multiple rooms with a single xLobby source. Since most new display technologies offer several component or HDMI inputs it is possible to have more than one xLobby client distributed to multiple locations by using the built-in switcher in the display.


Image

Wes Black \ Calrad
wesblack
 
Posts: 1134
Joined: Mon Mar 05, 2007 5:02 pm
Location: Valencia, Ca

Re: xLobby Multi-Client & Server Support

Postby visionandsound on Wed Sep 10, 2008 6:52 pm

Hi, we are totally new to Xlobby, we need some installation schematics for multi room video projects. Will be welcome any documents regarding the video and audio distribution of he system. Thanks
visionandsound
 
Posts: 1
Joined: Wed Sep 10, 2008 5:37 pm

Re: xLobby Multi-Client & Server Support

Postby wesblack on Wed Sep 10, 2008 7:15 pm

Please contact me directly and I can assist you with any questions you may have. You can see this post, It might help.

http://xlobby.com/news/2008/06/06/xlobby-multi-room-diagram-setup/

Tel:323-465-2131, USA only 1-800-821-8536,


Image

Wes Black \ Calrad
wesblack
 
Posts: 1134
Joined: Mon Mar 05, 2007 5:02 pm
Location: Valencia, Ca

Re: xLobby Multi-Client & Server Support

Postby billberet on Mon Dec 01, 2008 5:24 pm

I currently am using the Gefen 4x4 video matrix controlled by rs232 from xlobby V3.
The video is being pushed by an ATI 512mb HD Radeon 3870
once the video is sent thru the component out from the xlobby server to the matrix, it can then be displayed throughout the house.
multizone video is hardware based so there should be no issues.
Image
billberet
 
Posts: 738
Joined: Mon Sep 29, 2008 9:26 pm
Location: NYC


Return to Multizone Video

Who is online

Users browsing this forum: No registered users and 0 guests