Here is a few details on xLobby display 0, 1.
1. The ability to decide which xLobby media players will render on display 1, etc.
2. The new rendering system will allow you to playback content on display 1 while display 0 can navigate to any menu
and not interfere with content playback on display 1 unless the user wants to.
3. Reverse the rolls of display 0 and display 1.
4. The ability to run multiple instances of xLobby on a single machine with 3 displays and launch them independently to different displays, one xLobby on display 0 and the other xLobby on display 1.This type of setup allows xLobby to use a dual graphics card and the additional single VGA graphic card to display video as follows, ((Extended) setup the dual graphic card can output component video to a large plasma, lcd, projector, etc and the VGA output to drive a VGA touchscreen using Calrads S3 card each resolution can be resized pixel by pixel independently, so 720P on component and 1024 x 768 to the touchscreen. This allows xLobby 1.exe to provide movie playback on the component output and simultaneous menu control to VGA output for touchscreen 1. The single VGA graphic card will display xLobby 2.exe and this touchscreen can show and control xLobby 2.exe independently like its running on its on hardware.
The other possible setup is using xLobby 2.exe and the dual graphic card, (Mirrored) component and VGA outputs, with the single VGA graphic card output for control using xLobby2.exe as a fat client in mimic mode.
On xLobby V2 we sucessfully ran 5 xLobby.exes on a single machine with 5 VGA outputs to 5 touchscreens all in differnt menus controlling multiple audio zones, screens etc all on a single xLobby machine.
Exact features and details will be posted with the release.
xLobby Skin by: Andy Grooby
Control on display 0, Playback on display 1
Wes Black \ Calrad